Skip to content

YouTube 12-hour limit calculator: restart cycles for a 24/7 stream

YouTube has a 12-hour archive limit for live streams, so a 24/7 stream is split into cycles shorter than 12 hours. Enter the cycle length and the break between cycles to see how many restarts that means per day, how long the stream is offline and when each cycle starts.

Presets:
Cycles per day
2.01
Restarts per day
2.01
Offline time per day
2 min
Uptime
99.86%

Start of each cycle

CycleStartsEnds
1Day 1, 00:00Day 1, 11:55
2Day 1, 11:56Day 1, 23:51
3Day 1, 23:52Day 2, 11:47
4Day 2, 11:48Day 2, 23:43
5Day 2, 23:44Day 3, 11:39

With no break the start times drift earlier every day, because a day is not a whole number of cycles.

How it is calculated

One cycle plus its offline time is one period: period = cycle length + offline time per restart. With a break, the offline time is the break; with no break, it is the gap you enter (YouCast restarts take about a minute).

Cycles per day = 1,440 minutes divided by the period. Offline time per day = cycles per day times the offline time per restart. Uptime = 1 minus offline time per day divided by 1,440.

Every start time is the first start plus a whole number of periods, so the list shows when each cycle begins, including the day it falls on.

Run it from the cloud

YouCast streams your uploaded videos 24/7 with no PC running. The 3-day free trial needs no credit card.

Frequently asked questions

Why 11 hours 55 minutes?

+

YouTube keeps a replay of a live stream only under its 12-hour archive limit, so a cycle must end before that. 11 h 55 min leaves a 5-minute margin and keeps the stream on air for as long as possible.

How long is the stream offline at each restart?

+

In YouCast about a minute at each restart. The calculator lets you change that gap if your setup differs.

Why do start times move earlier each day?

+

Two cycles of 11 h 55 min plus their restarts take a little less than 24 hours, so the third cycle starts a few minutes earlier than the first one did the day before. Pick the first start time so the gaps fall at quiet hours.

Can I set this up in YouCast?

+

Yes. On the Schedule step choose Back-to-back cycles, set the duration and the break, and YouCast restarts the stream for you.